Roland V-Bass - PT SHIFT (Pitch Shift)

47
Chapter 5. Parameter guide
Chapter 5
LEVEL (Pickup Level) 0–100
Adjusts the overall volume of the pickup.
F.VOL (Front Pickup Volume) 0–100
Adjusts the volume of the front pickup.
F.TONE (Front Pickup Tone) 0–100
Adjusts the tone of the front pickup.
R.VOL (Rear Pickup Volume) 0–100
Adjusts the volume of the rear pickup.
R.TONE (Rear Pickup Tone) 0–100
Adjusts the tone of the rear pickup.
TONE 0–100
Adjusts the tone of the pickup.
BASS -50–+50
Adjusts the tone of the lower range.
TREBLE -50–+50
Adjusts the tone of the upper range.
PU SEL (Pickup Select Switch)
SOLO/RTM (Solo/Rhythm)
BASS ON OFF, ON
Switches the front pickup on/off.
TRBLE ON (Treble On) OFF, ON
Switches the rear pickup on/off.
PT SHIFT (Pitch Shift)
Make settings for the pitch shift sound.
ON/OFF
Turn pedal shift on/off.
● If the COSM BASS parameter TYPE
is set to “OSC SYNTH”
SHIFT Hi–Lo (OSC Pitch Shift) -12–+12
Specifies the amount of pitch shift (change in pitch) for the
oscillator in semitone steps.
FINE Hi–Lo (OSC Fine) -50–+50
Makes fine adjustments in one-cent steps to the pitch shifted
sound of the oscillator.
● If the COSM BASS parameter TYPE is
set to anything other than OSC SYNTH
MODE
< If the mode is set to “SHIFT” >
SHIFT Hi–Lo
-24–+24
Adjusts the amount of pitch shift (change in pitch) for each
string in semitone steps.
FINE Hi–Lo -50–+50
Makes fine adjustments in one-cent steps to the pitch shift for
each string.
E.LEV Hi–Lo (String effect level) 0–100
Adjusts the pitch shifter volume for each string.
D.LEV Hi–Lo (String Direct Level) 0–100
Adjusts the volume of the direct sound for each string.
< If the mode is set to “HARMO” >
HARMO Hi–Lo (String Harmony) -2OCT–+2OCT
Specifies the pitch of the note that is added to the input
sound when generating harmony. You can specify a pitch in
a +/-2 octave range relative to the input sound.
REAR Select the rear pickup.
FRNT+REAR Select the front + rear pickups.
FRONT Select the front pickup
SOLO The volume will be set to 100.
RHTHM The volume will be set to 50.
SHIFT Operates as a pitch shifter.
HARMO Operates as a harmonist effect.