48
Chapter 5. Parameter guide
KEY
C (Am)–B (G#m)
Specifies the key of the song you will play. By specifying the
key, you can create harmonies that are suitable for your song.
The key of the song will be as follows according to the sharps
and flats (#, b) in the key signature.
* The specified value is common with the MASTER KEY (p. 63).
fig.5-50
E.LEV Hi–Lo
(String effect level) 0–100
Adjusts the volume of the harmonist sound for each string.
D.LEV Hi–Lo
(String Direct Level) 0–100
Adjusts the volume of the direct sound for each string.
FRETLESS
Simulates the sound of a fretless bass.
* This cannot be switched on/off.
PRESET
Select one of the preset types of fretless bass.
LEVEL
0–100
Adjusts the volume.
TONE
0–100
Adjusts the tone.
SENS
(Sensitivity) 0–100
Adjusts the input sensitivity.
COLOR
0–100
Adjust the color of the fretless bass itself.
WAVE SYNTH
The input sound of the bass is processed to create a synth sound.
* This cannot be switched on/off.
PRESET
Select one of the preset WAVE synth types.
W.SHAPE
(Wave Shape)
Select the type of wave that will be the basis of the bass synth.
SENS
(Sensitivity) 0–100
Adjusts the input sensitivity.
LEVEL
0–100
Adjusts the volume of the synth sound.
ATTACK
0–100
Adjusts the attack time of the synth sound. Lower settings of
this value will produce a shorter (faster) attack, and higher
settings will produce a longer (slower) attack.
DECAY
0–100
Adjusts the time over which the tonal character of the sound
decays when the bass is plucked strongly.
CUTOFF
0–100
Adjusts the frequency at which the harmonic content of the
sound will be cut (the cutoff frequency).
RESO
(Resonance) 0–100
Adjusts the resonance (tonal character) of the synthesizer
sound. Increasing this value will produce a more distinctive
tonal character.
F.TYPE
(Filter Type) -12dB, -24dB
Selects the steepness of the filter.
F.ATTACK
(Filter Attack) 0–100
Specifies the filter attack time.
F.DECAY
(Filter Decay) 0–100
Adjusts the time over which the filter change will come to rest.
F.DEPTH
(Filter Depth) -50–+50
Adjusts the filter depth. Higher settings allow the filter to
produce greater change. “+” and “-” will cause the filter to
move in opposite directions.
Major
CF B
E
A
D
Am Dm Gm Cm Fm B
mMinor
Major GDA EB
Em Bm F
mC
mG
m
Minor
F
D
m
G
E
m
SAW Produces a sawtooth wave synth sound.
SQUARE A square wave synth sound will be produced.
To Next Page
Loading...
