Roland V-Synth User Manual (English)

Other manuals for Roland V-Synth

Owner's Manual213 pages

Service Notes52 pages

Reference Guide2 pages

Supplementary Guide21 pages

Sound List2 pages

Quick Start32 pages

Brochure & Specs4 pages

Questions and Answers:

C
Carolyn CareyAug 31, 2025
Why are effects not applying on my Roland V-Synth Electronic Keyboard?
- T
  tammy00Aug 31, 2025
  If effects aren't applying to your Roland Electronic Keyboard, first ensure that the [MFX], [CHO], and [REV] effect switches are turned on. Also, verify that the send level of each effect is not set to 0. Even with send levels set, effects won't apply if the MFX Master Level, Chorus Master Level, or Reverb Master Level is set to 0. Finally, if Output Assign is set to something other than 'MULTI,' the MFX sound won't be output. Check the setting.
V
vargasjenniferSep 10, 2025
Why is there no sound coming from my Roland Synthesizer?
- D
  Dr. Janice HughesSep 10, 2025
  Several factors could cause a lack of sound or low volume. First, ensure your amplifier or mixer is powered on. Then, check the volume levels on both the V-Synth and any connected equipment. If sound is present in the headphones, examine the connection cables for damage or potential malfunctions in the amp or mixer. Also, verify that the Local Switch is turned ON, the Patch level isn't too low, the Effect settings are properly configured, the output destination settings are correct, no external MIDI devices are sending volume-reducing messages, the oscillator is on, and the V-Synth isn't in USB Storage mode.
J
josephdavisAug 30, 2025
How to fix low volume from instrument connected to input jacks on Roland V-Synth?
- J
  John ShawAug 30, 2025
  If the volume level of an instrument connected to the INPUT Jacks of your Roland Electronic Keyboard is too low, the issue might be the connection cable. Be sure to use a connection cable that does not contain a resistor.
K
Kimberly BakerSep 12, 2025
What to do if the Roland Synthesizer drive is not mounted in Windows XP?
- E
  elizabethsanchezSep 12, 2025
  If the V-Synth drive isn't mounting in Windows XP, it may be due to a conflict with a network drive. Try changing the assignment of the network drive to resolve the conflict.
M
Matthew EdwardsSep 12, 2025
What to do if my Roland Synthesizer power does not turn on?
- D
  Daniel FrancoSep 12, 2025
  If your Roland Synthesizer isn't powering on, the first thing you should do is check the AC cord connections. Ensure the cord is correctly connected to both the V-Synth and a functioning AC outlet.
S
Stephanie WrightAug 27, 2025
Why does Windows XP/2000 displays a “Hardware Installation” or “Digital Signature Not Found” dialog box for Roland Synthesizer?
- L
  Lisa HolmesAug 27, 2025
  If Windows XP/2000 displays a “Hardware Installation” or “Digital Signature Not Found” dialog box when installing the Roland Synthesizer driver, you must configure the settings described in “Driver Signing Options.”
D
davisgeorgeAug 27, 2025
Why can’t I install/delete/use the Roland Synthesizer driver in Windows XP/2000?
- J
  Julie SanchezAug 27, 2025
  To install, delete, or reinstall the driver in Windows XP/2000 for your Roland Synthesizer, you must be logged into Windows as a user with administrative privileges, such as Administrator. Also, you must configure “Driver Signing Options.”
M
Michael JonesAug 26, 2025
Why does Roland Synthesizer show an “Unknown driver found” dialog box, and you are unable to install the driver?
- W
  wandajacksonAug 26, 2025
  If you encounter an “Unknown driver found” dialog box and can't install the driver for your Roland Synthesizer, it's possible that the computer has detected the V-Synth incorrectly. Delete the incorrect device information and then reinstall the driver.
C
cooperandrewAug 25, 2025
Why does Roland Synthesizer “Found unknown device” appears even though you installed the driver?
- M
  Marcus JamesAug 26, 2025
  If the “Found unknown device” dialog box appears even though you've installed the driver for your Roland Synthesizer, and your computer or USB hub has multiple USB connectors, it could be because you connected the V-Synth to a USB connector to which it hasn't been connected before. Reinstall the driver, referring to the Readme file on the included CD-ROM. If the issue persists with the same USB connector, the computer may have detected the V-Synth incorrectly. Delete the incorrect device information and reinstall the driver.
D
dmirandaAug 25, 2025
How to fix V-Synth driver not mounted in Windows XP?
- E
  Elizabeth PenaAug 25, 2025
  If the V-Synth driver is not mounted in Windows XP, and a network drive is mounted, change the assignment of the network drive.

Roland V-Synth Specifications

General

Arpeggiator	Yes
Velocity Sensitivity	Yes
Aftertouch	Yes
Vocoder	Yes
USB	No
Keyboard	61 keys (velocity and aftertouch sensitive)
Effects	Chorus, Delay, Reverb, Distortion, Flanger, Phaser
Sampling	Yes
Display	320x240 pixel color LCD
MIDI	In/Out/Thru
Type	Synthesizer
LFO	Yes
Storage	SmartMedia card
Outputs	Stereo
Headphones	Yes
Power Supply	AC
Inputs	Stereo Line, Microphone
Audio Inputs	Stereo Line, Mic