To Next PageTo Next Page
Why can’t I install/delete/use the Roland Synthesizer driver in Windows XP/2000?
To install, delete, or reinstall the driver in Windows XP/2000 for your Roland Synthesizer, you must be logged into Windows as a user with administrative privileges, such as Administrator. Also, you must configure “Driver Signing Options.”
Why does Windows XP/2000 displays a “Hardware Installation” or “Digital Signature Not Found” dialog box for Roland Synthesizer?
If Windows XP/2000 displays a “Hardware Installation” or “Digital Signature Not Found” dialog box when installing the Roland Synthesizer driver, you must configure the settings described in “Driver Signing Options.”
Why does my Roland Synthesizer show the message of “Drivers needed for the USB device “V-Synth” are not available.
If you see the message “Drivers needed for the USB device “V-Synth” are not available” when using your Roland Synthesizer, it's possible that the V-Synth’s USB MIDI driver hasn't been correctly installed on your computer. Correctly install the USB MIDI driver as described in the Readme file on the included CD-ROM. Also, it's possible that there is a conflict with the driver of another USB device. If you have an I-O Data Corporation’s USB CD-R drive installed, disable “ISD 200 BOTBridge” or other driver file by moving it out of the Extensions folder, located within the system folder.
What to do if sound is distorted on Roland V-Synth?
If the sound from your Roland Electronic Keyboard is distorted, check the effect settings to see if an effect that distorts the sound is active. Also, verify that the Patch level hasn't been turned up too high. Check the Level parameter setting.
Why is the pitch wrong on my Roland V-Synth Electronic Keyboard?
Incorrect pitch on your Roland Electronic Keyboard can stem from several settings. Check the Coarse Tune and Fine Tune parameters in the Oscillator section, as well as the Master Tune setting. Also, verify whether a Pitch Bend message has been received from an external device, potentially causing the pitch to remain altered. Try moving the pitch bend lever of the connected MIDI keyboard.
How to fix low volume from instrument connected to input jacks on Roland V-Synth?
If the volume level of an instrument connected to the INPUT Jacks of your Roland Electronic Keyboard is too low, the issue might be the connection cable. Be sure to use a connection cable that does not contain a resistor.
Why do notes not stop when playing Roland V-Synth Electronic Keyboard?
If notes don't stop when you play your Roland Electronic Keyboard, the polarity of the Hold Pedal might be reversed. Check the Hold Polarity parameter setting.
Why are effects not applying on my Roland V-Synth Electronic Keyboard?
If effects aren't applying to your Roland Electronic Keyboard, first ensure that the [MFX], [CHO], and [REV] effect switches are turned on. Also, verify that the send level of each effect is not set to 0. Even with send levels set, effects won't apply if the MFX Master Level, Chorus Master Level, or Reverb Master Level is set to 0. Finally, if Output Assign is set to something other than 'MULTI,' the MFX sound won't be output. Check the setting.
Why no sound from connected MIDI device on Roland Electronic Keyboard?
If there's no sound from a connected MIDI device on your Roland Electronic Keyboard, ensure the instrument is set to transmit MIDI messages by checking the Patch Tx Ch parameter setting. Also, confirm that the MIDI transmit channel for the V-Synth matches the MIDI receive channel for the connected MIDI device. Check the Patch Tx Ch parameter setting.
What to do if Roland V-Synth Electronic Keyboard oscillator type is EXT IN but no sound is heard?
If the Oscillator Type on your Roland Electronic Keyboard is set to 'EXT IN,' but no sound is heard when audio is input through the INPUT jacks, remember that you won't hear sound unless you play the keyboard. Try playing the keyboard.
General| Arpeggiator | Yes |
|---|---|
| Velocity Sensitivity | Yes |
| Aftertouch | Yes |
| Vocoder | Yes |
| USB | No |
| Keyboard | 61 keys (velocity and aftertouch sensitive) |
| Effects | Chorus, Delay, Reverb, Distortion, Flanger, Phaser |
| Sampling | Yes |
| Display | 320x240 pixel color LCD |
| MIDI | In/Out/Thru |
| Type | Synthesizer |
| LFO | Yes |
| Storage | SmartMedia card |
| Outputs | Stereo |
| Headphones | Yes |
| Power Supply | AC |
| Inputs | Stereo Line, Microphone |
| Audio Inputs | Stereo Line, Mic |
