Rose electronics ORION User Manual

16
Orion Installation and Operations Manual
CON Port Configuration
Select “CON Ports” in the “Configuration” menu and press <RETURN>.
The “CON Ports” mask will displayed full screen as shown in figure 11.
This menu allows the administrator to define for each CON Port the name, the type, the OSD
resolution, and the connected CPU.
Please note the following guidelines for type selection:
 Single-Head Ports and USB 2.0 Ports can be switched separately.
 Dual-Head Ports, Quad-Head Ports, Single-Head/USB 2.0 Ports and Triple-Head/USB
2.0 Ports are always switched in parallel.
 Only odd Port numbers (#01, 03, 05, etc.) may be configured as Dual-Head Ports or
Single-Head/USB 2.0 Ports.
 Only every fourth Port (#01, 05, 09, etc.) may be configured as Quad-Head Port or
Triple-Head/USB 2.0 Port.
 Only the first CON-Port can be switched by Hotkeys, all other Ports behave like Slaves.
 If you switch from a Multi-Head CPU-Port to a differently configured CPU Port, one or
more monitors may remain dark.
 If the user switches from a Quad-Head Console to a Single-Head CPU Port, all other
three monitors will remain dark.
 If the user switches from a Quad-Head Console to a Dual-Head CPU Port, the last two
monitors will remain dark.
 If the user at a Triple-Head/USB 2.0 Console switches to a Single-Head/USB 2.0 CPU
Port, two monitors will remain and the USB-Port remains inactive.
 If the user at a Single-Head/USB 2.0 Console switches to a Single-Head CPU Port with
a subsequent USB 2.0 CPU Port, the USB Port still remains inactive.

Rose electronics ORION Specifications

General

Brand	Rose electronics
Model	ORION
Category	Switch
Language	English