Rose electronics ORION - Keyboard Commands

Orion Installation and Operations Manual
29
Assignment of a single signal (K/M or MON) is performed by <SPACE>. Assignment of both K/M and MON is
performed by <RETURN>. Any assignment is performed immediately. Existing assignments are cancelled.
Keyboard Commands:
<Cursor left> Cursor left Select CPU Port to the left
<Cursor right> Cursor right Select CPU Port to the right
<Cursor up> Line above Select keyboard/mouse for current User Port or
Select monitor for User Port one line above
<Cursor down> Line below Select monitor for current User Port or Select keyboard/mouse
for User Port one line below
<RETURN> Confirm selected monitor AND keyboard/mouse assignment
(for CPU / User Port at cursor position).
Attention: Switch command is executed immediately
<SPACE> Confirm selected monitor OR keyboard/mouse assignment (for CPU / User Port at cursor position).
Attention: Switch command is executed immediately – No plausibility check – Admissibility of
configuration under responsibility of the user!
<ESC> Return to “Menu”