3-8
MODEL 54 C SECTION 3
PROGRAMING THE ANALYZER
4.
*If this value is changed, be sure to rerange output as described in
Section 3.2
.
Pressing More (F3) allows configuration of other hold and fault func-
tions.
5.
Pressing Exit (F1) returns screen to the first configuration menu.
O2 Hold: Fixed value
O2 Fixed Hold: 21.00 mA
O2 Fault:
22.00 mA
Exit More Enter
O2: Temperature
O2: 4-20 mA
O2 Dampen: 0 sec
Exit More Enter
Menu Item Options
O2 Output 2 Measurement Temp/Conductivity
O2 Current range* 4-20 mA/0-20mA
O2 Output 2 Dampen 0-255 sec.
Menu Item Options
O2 Hold (Output 2 action Last value/
in hold mode) Fixed value
O2 Fixed Hold (if Output 2 hold is “Fixed value”) 0-22.00 mA
O2 Fault (output 2 action in a fault condition) 0-22.00mA
To Next Page
Loading...