Section
1-1
1 Introduction
USING THIS MANUAL This manual is intended to assist in installing, operating, and
maintaining Rosemount Model 3144 and 3244MV Smart Temperature
Transmitters.
Section 2: Installation
Section 2 explains how to commission transmitters; provides an
installation flowchart; and describes electrical, mechanical, and
environmental installation considerations.
Section 3: On-line Operations
Section 3 describes how to configure transmitter software, select a
sensor type, adjust the input and output electronics; and how to change
output characteristics (range settings, output type, damping, and units)
and non-output-related transmitter characteristics (including the
transmitter tag number, date, and message).
Section 4: Maintenance
Section 4 describes hardware diagnostics, maintenance tasks, and
hardware troubleshooting.
Section 5: Specifications and Reference Data
Section 5 lists functional, performance, and physical specification data
for the transmitter. This section also includes transmitter drawings,
ordering information, and a list of spare parts.
Section 6: Options
Section 6 presents options including the LCD meter, mounting
brackets, custom configuration and calibration, trim to special sensor,
and external ground-lug assembly.
Appendix A: Transmitter Improvements
Appendix A describes the enhancements that have been made to the
Model 3144 and 3244MV Smart Temperature Transmitters, and
includes a chart that compares previous transmitter versions to the
current improved transmitter version.
Appendix B: Model 275 HART
®
Communicator
Appendix B provides a complete menu tree, a table of fast key
sequences, and other information regarding use of the Model 275
HART
®
Communicator.
Appendix C: Model 268 SMART FAMILY
®
Interface
Appendix C provides a complete menu tree and other information
regarding use of the Model 268 SMART FAMILY
®
Interface.
Appendix D: Hazardous Area Approval Installation Drawings
Appendix D provides hazardous location installation drawings.
To Next Page
Loading...
