Wireless N Adapter RNX-N150PCx User Manual
4.3.1 Steps to add wireless signal with Rosewill
Utility for one time use
This section will lead you to link your wireless signal with
your RNX-N150PCx. Please follow the Figure 4-9 in adding
the signal.
1. Click“Rescan＂: Click on Rescan to search for
all wireless signals near you.
2. Select your desire SSID: Click to select your
wireless signal, in this example, you can see
next to AP1; meaning we have select AP1 as
our desired SSID.
3. Click“Add to Profile＂or“Connect＂:
I. Add to Profile: This part will help your
wireless adapter memorize the signal and
password for your future use. Please see
Next Section for more detail.
II. Connect: This is when you are in locations
where you do not need your adapter to
remember the signal.
Figure 4-9
- 21 -
To Next Page
Loading...
Need help?
General
