Wireless N Adapter RNX-N150PCx User Manual
Sub Mask: Sub mask about current connection.
Default Gateway: Default gateway about current connection.
Link Speed: Show current transmit rate and receive rate.
Throughout: Display transmits and receive throughput in unit of
Mbps.
Link Quality: Display connection quality based on signal
strength and TX/RX packet error rate.
Signal Strength 1: Receive signal strength 1, user can choose
to display as percentage or dBm format.
Signal Strength 2: Receive signal strength 2, user can choose
to display as percentage or dBm format.
Signal Strength 3: Receive signal strength 3, user can choose
to display as percentage or dBm format.
Noise Strength: Display the surrounding environment noise
signal strength.
HT: Display current HT status in use, containing BW, GI, MCS,
SNR0, and SNR1 value.
(Show the information only for
802.11n wireless card.)
- 32 -
To Next Page
Loading...
