51. Press the two push‑buttons on the ‘Tailgate
lowering’ control panel simultaneously until the
tailgate engages locks and then release the push‑
buttons.
• Tailgate should rotate smoothly downwards
about the hinge pins until it engages face of
body, then lower into locks.
• ‘Vehicle reversing’ alarm should sound until the
tailgate engages locks when it should silence.
• ‘System on’ pictogram should display when the
tailgate engages locks.
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure 2 Bar
52. Press and release the return switch.
2748-DS003-OL1-D-GB-G2
Hyd Oil Temp 32
o
C
01.06.2013 09:00:00
0 No errors
0 No errors
0 No errors
2748-DS004-OL1-D-GB-G2
0 No errors
0 No errors
0 No errors
Hyd Oil Temp
0 No errors
0 No errors
32
o
C
01.06.2013 09:00:00
Hyd_Oil_Pressure 2 Bar
2748-DS030-OL1-D-GB-G2
• The screen should display the ‘Body system
run’ mode and ’System on’ pictogram.
WARNINGS:
DRIVER MUST BE IN CAB.
PARKING BRAKE MUST BE APPLIED.
ALL PERSONNEL MUST BE CLEAR OF
FRONT AND REAR OF VEHICLE.
53. Select a gear in the cab.
54. Press ‘Start pack cycle’ push‑button on
compaction mechanism control panel.
• Compaction mechanism should not operate.
55. Select Neutral.
DAILY CHECKS
3‑14
OM1R-SM-GB01R
3