SCHEDULED MAINTENANCE
6‑8
OM1R-SM-GB01R
6.7.1 Power Take-Off propeller
shaft lubrication
WARNING:
THE POWER TAKE-OFF EXPOSED SHAFT
ROTATES WHEN THE ENGINE IS RUNNING.
Where a propeller shaft is used to connect the
hydraulic pump to the power take off, grease nipples
may be fitted to enable greasing of the universal joints
and splined connection (see Fig. 6‑3, 1).
These should be greased every 300 hours.
1
Fig. 6-3 Power Take-Off lubrication points
6
To Next Page
Loading...
