EasyManua.ls Logo

RosRoca Olympus Mini - Body Identification Label; Cycle Time; Ejection Plate; General Specification Data

RosRoca Olympus Mini
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GENERAL SPECIFICATION DATA
8‑3
OM1R-SM-GB01R
8 General specification data
8.1 Body identification label
The body identification label is attached to the front of
the body on the lower right‑hand corner.
The information on the label is shown below:
Machine category / Body type
Serial number
Order number
Year of manufacturer.
4525-OM1-R-GB-G1
1024822
Av.Cervera, S/N - Apartado 31
CP: 25.300 Tárrega (Lérida) España
Teléfono: (+34) 973508100
XXXXXXXXXXXXXX
MODELO
(TYPE)
NUMERO
(NUMB)
AÑO
(YEAR)
8.2 Typical operation times
8.2.1 Cycle time
Cycle time with an empty tailgate = 15 ‑ 16 seconds.
8.2.2 Ejection plate
Eject stroke = 25 ‑ 35 seconds
Note: Ejection plate times are approximate because of
friction on the tracks.
Times may vary depending on body size and type of
refuse.
8.2.3 Tailgate raise/lower
Tailgate raise = 17 ‑ 21 seconds.
Tailgate lower = 22 ‑ 28 seconds.
8.3 Noise level
The maximum A‑weighted sound pressure level at
operators work‑stations is less than or equal to
104 dB(A).
8.4 Hydraulic pressures
WARNING:
IF A FAULT OCCURS WITH THE MECHANISM
OR THE FUNCTION TIMES ARE ERRATIC
REPORT THE FAULT TO SUPERVISION
IMMEDIATELY. DO NOT ATTEMPT TO MAKE
ANY HYDRAULIC ADJUSTMENTS AS THIS
WILL COMPROMISE SAFETY AND NULLIFY
ANY WARRANTY AGREEMENTS WITH
ROS ROCA S.A.
8

Table of Contents

Related product manuals