Connecting between MD-N33 and AC-215
38 AC-215 Installation Manual
If a failure message appeared, check the modem connections and repeat
the last steps.
B.7 Remote Modem – Configuration and Initialization
To configure a remote modem:
1. Click the Remote modem tab to configure the remote modem.
2. In the Settings section:
For most applications, the default initialization string of AS-525 is enough.
The initialization string is displayed in the window.
Adding or editing initialization string is allowed by uncheck "Use default"
and type the AT command in the "Initialization string" window.
To Next Page
Loading...
Need help?
General
