Rosslare AC-215 - Connecting MD-N32 to AC-215; Hardware Requirements; Topics; PC Side Connections

Connecting between MD-N32 and AC-215
32 AC-215 Installation Manual
A.5 MD-N32 Configuration with AxTraxNG
To configure the MD-N32:
1. Add a new network using the AxTraxNG software (for more details, see
the AxTrax user manuals.)
The network type should be selected as TCP/IP.
2. Click the Configuration tab and wait until "searching" is complete.
3. Click OK.
4. Select the suitable MAC address from the MD-N32 list. The MD-N32's
MAC address should be labeled on the MD-N32's box.