1. Introduction
The AC-825IP is an advanced networked access controller and is the backbone of a medium-scale to high-scale
security system that can handle up to 100,000 users and 500,000 events.
Each AC-825IP access control unit supports up to 6 doors (In/Out), each with 2 inputs and 1 output, and includes four
additional auxiliary inputs and two auxiliary outputs.
The number of supported doors, inputs, and outputs can be increased by using the onboard 10-pin expansion slot to
connect any of the following expansion boards:
•
R-805 – 16 outputs
•
S-805 – 16 inputs
•
D-805 – 4-door expansion
•
P-805 – 16 inputs and 8 outputs
The system currently supports 12 extension boards via RS-485 with Open Supervised Device Protocol (OSDP), of any
kind, in addition to the expansion board mounted on top of the AC-825IP panel. Four additional auxiliary inputs and
two auxiliary outputs are also on board.
AxTraxNG supports 4 Wiegand and 2 OSDP V1 plus up to 12 expansions.
AxTraxPro supports 4 Wiegand and 2 OSDP V2 plus up to 12 expansions or 6 OSDP V2 devices.
Driven by Rosslare’s powerful, flexible, and easy to use AxTraxNG™ or AxTraxPro™ Access Control Management
software, the system provides an ideal, modular, and expandable solution for commercial and institutional needs. It
provides seamless integration with Rosslare's UL Listed range of RFID proximity, PIN, Proximity & PIN, smart card,
and biometric readers with Rosslare’s selection of RFID credentials.
The AC-825IP is ready for installation with a mountable and lockable metal enclosure (ME-1515) integrated with a
switch, power management board/charger, sounder, and control panel.
Using an onboard Ethernet TCP/IP, multiple local or remote site door subnetworks can connect to the
AxTraxNG/AxTraxPro Access Control Management Software.
The communication between AxTraxPro and the AC-825IP control panel uses AES 256-bit symmetric data encryption
to make sure the data is secure.
www.rosslaresecurity.com
1
AC-825IP
Networked Controller
Installation & User Guide