Programming
28 AC-F/G4x Family Installation and Programming Manual
5.2 Changing the Open Code
The open code is mainly used as a method to quickly test the Lock
Strike relay during installation.
The factory 4-digit default setting for the open code is 2580.
For security reasons, when the first user is added to the controller or
the auxiliary code is changed, the default open code is automatically
deleted; non-default codes are not be erased automatically.
• Open code does not function in Secure mode.
• For wrong entries, you hear a long beep and the controller returns
to Normal mode.
• Code 0000 erases and deactivate the open code.
To change the Open code:
1. Enter Programming mode.
2. Press 1 to enter Menu 1.
The Mode indicator turns red.
3. Enter the new code you wish to set as open code.
4. The system returns to Normal mode.
You hear three beeps.
The Door indicator turns off.
The Mode indicator turns green.
To Next Page
Loading...
Need help?
General
