Programming
44 AC-F/G4x Family Installation and Programming Manual
5. Enter the code to be assigned as the primary or secondary code
for this slot number.
If the code entered is valid, the Mode indicator
the controller is ready for the next 3-digit slot number (Step 3) or
press # to move to the next slot number (Step 4).
If you do not wish to continue enrolling codes, press # twice and
the controller returns to Normal mode.
5.11.5 Search Method for Codes Enrolling
The code search method enables to quickly enroll a secondary code
for a user whose primary code is known and whose slot number is
unknown.
To enroll codes using the Search method:
1. Enter Programming mode.
2. Press 7 to enter Menu 7.
The Door indicator turns orange.
3. Enter the 3-digit user slot number 000.
The Door indicator flashes orange.
The controller is now waiting for the
primary code of the user
4. Enter the primary code belonging to the user who needs a
secondary code.
5. The Mode indicator flashes red.
If the primary code entered is not valid, a long beep sounds and
the controller waits for a valid primary code.
To Next Page
Loading...
Need help?
General
