Programming
32 AC-F/G4x Family Installation and Programming Manual
Enable Bypass Code and disable the
door chime – enter any code ending
with 0.
Enable Bypass Code and enable the
door chime – enter a code not ending
with 0.
The system returns to Normal mode.
You hear three beeps.
The Door indicator turns off.
The Mode indicator turns green.
5.7 Setting Fail Safe/Secure Operation
In this paragraph, the failsafe/fail secure operation of the door lock
and the Door Lock Strike Release time are set. Setting the sounding
period for the siren feature requires a BL-D40 External Sounder.
To set the failsafe/secure operation:
1. Enter Programming mode.
2. Press 6 to enter Menu 6.
The Mode indicator flashes green.
3. Construct a code using the following instructions:
To Next Page
Loading...
