Programming
AC-F/G4x Family Installation and Programming Manual 45
6. Enter the code to be used as the secondary code.
If the secondary code is valid, the controller beeps three times
and returns to Normal mode.
If the secondary code is invalid, the controller produces a long
beep and waits for a valid secondary code to be entered.
5.12 Deleting Codes
There are two methods to delete primary and secondary codes: a
standard method and a search method. When deleting a user slot,
both the primary code and the secondary code are erased.
It is recommended that a record be kept of added and deleted
users. This makes it easier to keep track of user slots’ status
(empty or not).
5.12.1 Standard Method for Deleting Codes
1. Enter Programming mode.
2. Press 8 to enter Menu 8.
The Mode indicator turns red.
The Door indicator turns orange.
3. Enter the 3-digit user slot code to be
deleted.
The Mode indicator flashes red, indicating
the controller is waiting for a programming
code to confirm the deletion.
If the user slot is empty, a long beep is
heard and the controller returns to Normal
mode.
To Next Page
Loading...
Need help?
General
