ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Fig. 23
Install ground wire (pos. 2) with lock nut M6 (Pos. 1) to the retaining plate. And fix
additional with tie wrap (pos.2).
Fig. 24
Fix tie wrap medium (pos. 1) onto the elbow of the wiring harness, see Fig. 25.
Attention: The wire of shift contact (pos. 2) must be isolated.
Fig. 25
Attention: Contact to ground may lead to misfiring.
Page 15/53
Edition 07/2016
To Next Page
Loading...
