DK00030.fm
REPAIR MANUAL
BRP-Powertrain
Effectivity: 125 MAX/125 Junior MAX/125 Mini
MAX/125 Micro MAX
Edition 2 / Rev. 0
Chapter 8
Page 10
December 01/2010
4.2) Installation of the water radiator
Instructions
Step Procedure
1 The assembly of the parts is identical to the disassembly in reverse order. See
Chap. 2
2 Add the specified volume (0.6 liters) of coolant with a funnel into the filler open-
ing (4) of the water radiator.
3 Close the radiator cap.
4 Check the cooling system for leaks by running the engine until it is at operating
temperature.
To Next Page
Loading...
