Rotex HPSU compact 308 - 10 Notes; User-Specific Settings; Switching Time Program

50
BA ROTEX HPSU compact 4 - 09/2013
10 x Notes
10 Notes
10.1 User-specific settings
10.1.1 Switching time program
The factory settings of the timer programs are stated in
chapter 3.4.7, tab. 3-7.
● Enter your switching time settings in the table below.
Switching cycle 1 Switching cycle 2 Switching cycle 3
Temperature
setting
[T-Room 1 Setpoint]: ____ °C [T-Room 2 Setpoint]: ____ °C [T-Room 3 Setpoint]: ____ °C
Time period On Off On Off On Off
HC Program 1
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
HC Program 2
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Tab. 10-1 Individual settings in the heating timer programmes
Switching cycle 1 Switching cycle 2 Switching cycle 3
Temperature
setting
[T-DHW Setpoint 1]: ____ °C [T-DHW Setpoint 2]: ____ °C [T-DHW Setpoint 3]: ____ °C
Time period On Off On Off On Off
DHW Program 1
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
DHW Program 2
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Tab. 10-2 Individual settings in the hot water timer programmes