ROTORCOMP NK 31 - Transporting Unpacked System; Transport Options

4.2
[en] 02/2014
Installation and operating manual - NK 31ROTORCOMP VERDICHTER
4.3 Transporting unpacked system
The screw compressor can be moved with a
crane or with a lift truck or forklift truck when fas-
tened to a transport pallet.
Warning
Death or serious injuries due to falling cargo!
– Observe the local safety regulations!
– Select the lifting equipment in accordance with
the total weight to be transported!
– Remove all loose or swinging parts before lift-
ing the screw compressor!
– Remove drive or body components before-
hand!
– Only transport the compressor module while
depressurized!
– When transported on a pallet, the compressor
module must be securely fastened to it!
– Do not transport the compressor module on
the forks of a stacker or lift truck!
– Transport eyes are only designed for transport-
ing the compressor module!
– Do not stand or walk under cargo during trans-
port!
To transport on a pallet, secure the screw com-
pressor on the pallet with angle brackets.
4.4 Transport options
Figure 4-1