Rotronic HygroFlex - 18 Accessories for the Hygroflex

IN-E-HyFlex-V4_10
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
Instruction Manual
Document Type
HygroFlex transmitter version 4: instruction
manual
Document title
Page 57 of 61
© 2006; Rotronic AG IN-E-HyFlex-V2_10.doc
18 Accessories for the HygroFlex
Order Code Description
HW4-E HW4 software, Standard Edition ( single user)
HW4-P HW4 Professional Edition (FDA/GAMP validation functions, multi user)
HCA Programmable logic alarm and control card with 4 relay outputs. See note below.
HygroPalm 1 HygroPalm 1 indicator, limited to displaying the readings from the HygroFlex
HygroPalm 3 HygroPalm 3, field calibrator
AC1620 Cable HygroPalm 3 to HygroFlex
AC1621 Cable HygroPalm 1 to HygroFlex
AC1623 Cable service connector (MTA) to PC
AC1624 RS232 cable (HygroFlex to PC)
AC1616 Probe extension cable with signal amplifier, 2 to 200 meter (6 to 656 ft)
T7-03-B5
Adapter cable for optional 2nd probe. Cable length 3 meter (9.8 ft), 5 meter (16.4 ft) on
request
T7-03-WIN
Calibration cable HygroClip probe with T7 connector to PC. Terminated with a 25-pin SUB D
connector. Converter 25-pin to 9-pin is supplied. Cable length 3 meter (9.8 ft). Includes 115
VAC / 9VDC adapter to power probe and cable electronics.
IMPORTANT: this cable is compatible only with the HW3 software.
AC1618/35 probe simulator 35%RH / 77°F(25°C)
AC1618/50 probe simulator 50%RH / 77°F(25°C)
AC1618/80 probe simulator 80%RH / 77°F(25°C)
EA00-SCS 0%RH humidity std, SCS cert., pack of 5
EA05-SCS 5%RH humidity std, SCS cert., pack of 5
EA10-SCS 10%RH humidity std, SCS cert., pack of 5
EA20-SCS 20%RH humidity std, SCS cert., pack of 5
EA35-SCS 35%RH humidity std, SCS cert., pack of 5
EA50-SCS 50%RH humidity std, SCS cert., pack of 5
EA65-SCS 65%RH humidity std, SCS cert., pack of 5
EA80-SCS 80%RH humidity std, SCS cert., pack of 5
EA95-SCS 95%RH humidity std, SCS cert., pack of 5
ERV-15 calibration device for type ‘IW’ probes
ER-15 calibration device for 15mm diameter probes
ER-05 calibration device for 5mm diameter probes
EM-G calibration device for type ‘IE’ probes
HCA: The HygroClip Alarm (HCA) is a programmable logic alarm and control card designed for use
with other ROTRONIC products that have a RS-485 serial port. The HCA makes it possible to
implement alarm functions that would not be available with either the HygroFlex alone or with the
combination of the HygroFlex and a PC with the HW4 software. For example, the HCA makes it