EasyManua.ls Logo

Rottler HP6A - Section I; Section II - Ingredients; Section III - Physical Data

Default Icon
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Material Data Safety Sheets 8-6 HP6A Manual
SECTION I
Product name or number (as it appears on label) Date
ROTTLER Coolant
October, 1999
Manufacturer’s Name Emergency Phone #
Yuma Industries Incorporated YUMA 317-398-9862
CHEMTREC 800-424-9300
Address (Number, Street, City, State, & Zip Code
783 W. Mausoleum Road, Shelbyville, IN 46176-9720
Hazardous material description, proper ship
ping name, haz. class, haz. ID#
None
Additional hazard classes (as applicable)
None
Chemical family Formula
Water miscible cutting and grinding fluid concentrate See Section II
SECTION II - INGREDIENTS
CAS Regist
ry #
Wt%
Chemical Name(s)
Listed as a carcinogen in
NTP, IARC, or OSHA1910(z) (specify)
102-71-6 1-9 Triethanolamine
ACGIH(TLV): TWA=5mg/m3, Not listed
Balance classified as non-hazardous Ingredients
SECTION III – PHYSICAL DATA
Boiling Point Specific Gravity Odor Threshold (ppm)
Not available (H2O=1) @ 20°C 1.02 Not available
Vapor Pressure Percent Volatile (Vol. %) Percent Solid (Wt. %)
Not available Not available Not available
Vapor Density Evaporation Rate Freezing Point (
°
C)
Not available Not available Not available
Solubility in Water pH Material is
100% (4%) 9.6 Liquid
Appearance & Odor Volatile Organic Compounds (VOC)
Yellow with mild odor Not available

Table of Contents