Maintenance
4-4
HP6A Manual
Air Valve Lubricants:
Rottler Manufacturing has compiled a partial list of suitable oils for customer applications. If given a
choice, this list should help avoid potential problems down the road. The information is provided as a
result of recent lab testing and a great deal of field experience. The suitable oil should have an aniline
point in the 180-210 range and a viscosity of 150-200 seconds at 100 PSI (S.A.E. #10).
The following oils, without additives, are satisfactory:
Manufacturer: Oil Number
NFO NFO 10 H/NR
NFO NF0 10 W/NR
CHEVRON AW 10 MACHINE OIL
CHEVRON HANDY OIL 15
EXXON TERESSTIC 32
MOBIL MOBIL DTE LIGHT
MOBIL DEXRON II ATF
MOBIL AFT 210 TYPE F
MOBIL DTE 13M
MOBIL ALMO 525
MOBIL MIST LUBE 24
MOBIL DTE 24
MOBIL HYDRAULIC OIL 13
MOBIL HYDRAULIC OIL AW 32
WOLVERINE A-INDUSTRIAL 150 R&O
TITAN TYPE F ATF
TITAL DEXRON II ATF
AMERICAN INDUSTRIAL OIL 32
The use of Kerosene, animal or vegetable fats should be avoided for use as additives and or cleaning
agents
Any penetrants such as WD40 or Marvel Wonder Oil should
NEVER
be
used in the HP6A. Damage to the solenoid seals will result and are not covered
by warranty.
To Next Page
Loading...