Introduction / Safety / Installation
1-2 HP6A Manual
Safety Information:
For Your Own Safety Read This Instruction Manual Before Operating
This Machine.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
CAUTION used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
This machine is capable of causing severe bodily injury.
Safety Instructions for Machine Use
1. KEEP GUARDS IN PLACE and in proper working order.
2. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
3. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe
distance from work area.
4. WEAR THE PROPER APPAREL. DO NOT wear loose clothing, gloves, rings, bracelets, or
other jewelry which may get caught in moving parts. Non-Slip foot wear is recommended. Wear
protective hair covering to contain long hair.
5. ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty.
Everyday eye glasses only have impact resistant lenses, they are NOT safety glasses.
6. DO NOT OVER-REACH. Keep proper footing and balance at all times.
To Next Page
Loading...