QUICK START
CMS482
PLUSjCMS487
PLUS
The
Quick Start Program
Is
designed to help you quickly "get started" with the basics you need to run your
cash
register. It covers programming the Decimal Point. Rounding, Date, Time, Tax Rate, and Departments
lor
taxing
Or
non-taxing. Follow the Quick Start straight through, however, skip any steps which are not required by
Your
business needs. In going through the Quick Start,
If
an error tone sounds, press the Clear (C)
Key
and
continue
by repeating
the
step you are attempting
to
program.
NOTE:
It
is
not necessary
to
repeat the entire Quick Start Program
if
you wish to update or change a step
at
any time. Therefore, maintain your owner's manual
in
a safe place lor
all
future programming.
1.
Read
"Getting to Know Your Cash Register" and "Inslall Paper Roll"
'(see
pages 1-7).
2.
Turn the Manager Key
in
the
Control
Lock
to
the "PRG" (Program)
position.
3.
Press
(AMT
TENDfTOTAL) to generate a check tape.
4.
To set the DECIMAL POINT
(2
places, normally used
in
the U.S.) and the "THANK
YOU
CALL AGAIN"
stamp:
Type (1), press (PO), type (6), press (AMT TEND/TOTAL), then press
(#/ST/NS).
Important:
In
the
"REG"
(Register) mode,
it
Is
not necessary to press the decimal point when
ringing
up
a price.
5.
To set the format for printing the DATE and TIME:
Type (2), press
(PO), type (1). press (AMT TEND/TOTAL), then press
(#
/ST
INS).
6.
To
set
the
DATE
(use Year-Month-Day lormat). Note: The date will print Month-Day-Year
In
the
"REG'
(Register) mode. Example, to
set
May 27, 1991:
Type (1), press
(OTY
ITIME),
type
(9)(1)(0)(5)(2)(7),
then
press (AMT TEND/TOTALl.
7.
To set the CURRENT TIME (use military time). Example, to set 9:00 a.m.:
Type (2), press
(OTY
ITIME).
type
(0)(9)(0)(0), then
press
(AMT TENDlTOTAL).
Reminder:
)0
convert to military lime. add the number
12
to every hour after 12:00 noon;
Le
..
to
set
3:15 p.m., type (1515).
8a.
To
set
a DEPARTMENT for CHARGING
TAX.
Example, program (DEPARTMENT
1)
for charging tax:
Press (PLU/ALT),
type
(0)(0)(0)(1), then press (DEPARTMENT 1).
* Repeat (PLU/ALT) (0)(0)(0)(1) before every department you want to charge
tax.
8b.
To
set
a DEPARTMENT for CHARGING
NO
TAX.
Example. program (DEPARTMENT
2)
for charging
no
tax:
Press
(PLU/
AL T), type (0)(0)(0)(0),
then
press (DEPARTMENT 2).
*.
Repeat (PLU/ALT) (0)(0)(0)(0) before every department you want to charge
no
tax.
9a.
To set the
TAX
RATE.
Example,
If
your tax rate is
5%:
Type (1)(1), press (OTY
/TIME),
type (5), then press (AMT TEND/TOTAL).
Note:
If. for example, your tax rate is 7.5% then type (7.5).
9b.
To
set
the ROUNDING to the 5th place (normally used in the U.S.):
Type (9), press (PO), type (5), press (AMT TEND/TOTAL), then press
(#
1ST /NS).
8
~
..
--~~
..
~---
To Next Page
Loading...
