RSP STC20 - Installation of Tool Attachment on Tool

M0412-1 ver 3.0 11
2.2 Installation of tool attachment on tool
Action
Note
1
Safety
Read the safety
section 1.2.
2
Mount guide pins
Press guide pins, as
applicable, into the
corresponding holes
on the tool.
3
Fit tool attachment
Fit the tool attachment
and tool to each other
using the guide pins.
WARNING! The tool
attachment is heavy
and may cause
personal injury and
equipment damage if
dropped.
4
Mount tool attachment
Mount the tool
attachment using a
torque wrench.
NOTE! Fastening
screws can be entered
either from the tool
attachment side or the
tool side. See the
Product Description of
respective unit for
details.