RTI UC-IVB-50 - UC-MXT Media Xchange Transmitter

To Next Page

To Previous Page

RTI INTELLIGENT MEETINGS

Technical Support: support@rticontrol.com - Customer Service: custserv@rticontrol.com 16

4. Using UC-MXT Media Xchange™ Transmitter

Pair the UC-MXT to the UC-IVB-50 by connecting the transmitter to the USB-C port located on the right

side of the UC-IVB-50.

• The indicator ring on the UC-MXT will begin ashing white and the message “Paring Started” will

appear on the connected HDMI

screen indicating that pairing is in progress.

• Once the indicator light becomes solid, the pairing process will be complete and “Pairing Succeeded”

will be indicated on-screen.

• Remove the UC-MXT from the UC-IVB-50.

Important Note: Please note that this pairing process only needs to be completed once, or re-paired

after the UC-IVB-50 device name has been modied.

Step 1: Connect the UC-MXT to the USB-C port on a laptop or mobile device.

a) The indicator ring on the UC-MXT will begin ashing as it connects wirelessly to the UC-IVB-50.

b) Once the indicator light becomes solid, the UC-IVB-50 will be linked to the UC-IVB-50 and

media sharing can begin.

Step 2: Start media sharing by pressing the button located on the face of the UC-MXT. The

UC-MXT will appear as an additional display on the connected laptop/mobile device. This display

can be set like any other, and can mirror or extend the primary display, but it will be dependent

on the capabilities of the device that it is connected to.

a) The indicator ring will blink dimly white while media sharing is in progress.

b) To temporarily pause screen sharing, press the

button on the face of the UC-MXT.

c) To un-pause and resume media sharing, press the

button again.

d) If using Split Screen mode, long-pressing (~3 seconds) the button will switch to

Single View mode and display the media in full screen.

e) To stop media sharing, press the button. The UC-MXT will still be linked to the

UC-IVB-50 and media sharing can be started again by pressing the

button.

Note: Up to 2 UC-MXT Media Xchange™ Transmitters can be linked and used with each UC-IVB-50.