RTI UC-IVB-50 - Page 25

RTI INTELLIGENT MEETINGS
25
www.rticontrol.com
GUI Elements Description / Options
CEC
• On (default setting): Enable CEC control. When this feature is enabled, the UC-IVB-50
will send a CEC command (One Touch Play) to automatically turn the connected
HDMI
®
display on when the video bar wakes from its standby state. When the UC-
IVB-50 senses that no active sources have been connected for 60 seconds, the UV-
IVB-50 will send a CEC command (Standby) to turn the connected HDMI
®
display o.
Wake triggers:
› Wired source connected, HDMI
®
or DP
› USB connected, USB-B or USB-C
› Any key from the remote
› API command
• O: Disable CEC control.
One Touch play
• Set the CEC one touch play command in hex of the controlled display device.
For more information about the command, please see the user guide of your
display device.
• By default, it’s set as “80 04”.
Standby
Set the CEC standby command in hex of the controlled display device. For more
information about the command, please see the user guide of your display
device.
By default, it’s set as “80 36”.
Apply Click to save and apply any setting changes.
Load Default Click to load the default CEC settings.
CEC Test
• One Touch Play: Click to test the display on CEC command.
• Standby: Click to test the display o CEC command.