Chapter 6. DashON Setting
DashON is an utility to configure the device for your demo or test. We also provide the
corresponding SDK for your application development. The utility is auto-running in
background while the system turns on. This section is to brief what function are included in
DashON and how to set up based on Windows OS.
1. Device Information
Provide the system hardware, software, and firmware version information.
2. Vehicle Status
This section is to demo how to read the vehicle information such as vehicle battery
voltage, fuel, speed and so on while connecting with vehicle OBDII or SAE J1939. We
use the simulator to run the demo.
3. Communication Setting
This is to enable / disable Wi-Fi/BT/WWAN and configure the related setting.
4. System Status & Setting
This section contains the major configuration of the system device. Power
management, wake up event, IO configuration, brightness and watchdog timer setting
are included.
5. Location & Sensor
GPS configuration setting and temperature status
Double click the DashON icon into the utility if DashON is not running in background
To Next Page
Loading...
