RUKO F11PRO 2 - Starting;Stopping the Motor

F11PRO 2 User Manual
6.7 Starting/Stopping the Motor
6.7.1 Starting the Motors
Method 1
Push the joysticks to the 5 o'clock and 7 o'clock positions
simultaneously. Once the motors start, immediately release the
joysticks.
Method 2.
When the motors are not running, press and hold the
takeoff/landing button on the remote controller to start them.
6.7.2 Stopping the Motors
« Push the throttle stick to the lowest position and do not release it
until the motor stops.
Copyright ©2024 Ruko Al Rights Reserved. 45