SA Instruments 1030 - Page 173

Specifications
Revision C, August 2013
A-3
Capnograph:
CO
2
Measurement range end-tidal 0 – 9.9%
Analysis method single beam IR
Accuracy end-tidal 0.15%
Measurement range mmHg 0 – 76.0
Accuracy mmHg 1.1 mmHg
Sample flow 5 – 20 ml/min
Resp Rate 5 – 200 bpm
Pneumatic tube length 8 m
Module Capnometer size hxwxd cm 13x49x41
Capnometer weight 10 lbs
Interface size hxwxd cm 3.8x13.3x12.5
Power 100/115/230 VAC
Ventilator:
Resp Rate 5 – 150 bpm
Inspiratory flow 50 – 1000 ml/min
Percent inspiration 10 – 90%
Tidal volume 0.1 – 30 ml
Valve type pneumatic
Actuation pressure 25 – 50 psi
Assembly size hxwxd cm 1.0x5.4x2.4
Pneumatic tube length 8 m
Module Control unit size hxwxd cm 23x14x23
Control unit weight 6 lbs
Power 100/115/230 VAC
PC requirements:
Software: Windows 95, 98, NT, 2000, XP, Vista, 7, 8
Hardware: >1 GHz processor
Serial or USB port & CD
Display resolution 1024 x 768
pixels or greater