Introduction Page 3
Document id: 7000 108-011 A2
2.8.6 Radio settings 24
2.8.7 Long Range Settings 25
2.8.8 Alarm Relay 26
2.8.9 I/O port settings 27
2.8.10 System functional check 29
2.9 Installation Cables 31
2.9.1 R4 Transponder Data Cable 31
2.9.2 R4 Transponder Power cable 31
2.9.3 R4 Display Data Cable 31
2.9.4 R4 Display Power cable 31
2.9.5 VHF antenna cable 31
2.9.6 GPS antenna cable 31
2.10 Mechanical drawing R4 Transponder 32
2.11 Clearance area for R4 Transponder 33
2.12 Mechanical drawing R4 Display 34
2.13 Desktop mounting 35
2.14 Panel mounting 36
2.15 Schematic arrangement for bridge installation 39
2.16 Serial Communication Interfaces 40
2.16.1 Electrical Characteristics 40
2.16.2 ECDIS / Pilot systems interfaces 40
2.16.3 Sensor interfaces 44
2.16.4 Long Range equipment interface 46
2.16.5 RTCM interface 50
3 TECHNICAL SPECIFICATIONS 51
3.1 R4 Transponder 51
3.2 R4 Display 52
3.3 AIS Alarm Relay 53
4 APPENDICES 54
Appendix A.1 – Reference documents 55
Appendix A.2 – Interpretation of IEC 61162-1 Sentences 56
Appendix A.3 – Proprietary Indications (TXT) 62
Appendix A.4 – Proprietary Output Sentences (PSTT) 63
Appendix A.5 – GPS-Cable Selector 64
Appendix A.6 – VHF-Cable Selector 65
Appendix A.7 – Glossary 66
Appendix A.8 – Global Product Support 67
Appendix A.9 – AIS Class A Certificate 68
To Next Page
Loading...
