English
5
13
5 INSTALLATION
5.1 Cautions
The appliance cannot be installed in
external areas. Avoid installing it in areas
where the temperature is lower than
+2°C or higher than 32°C and in
particularly humid or dusty places. It should
neither be installed in places where water
jets are used for cleaning operations nor
where there is a risk of fire or explosion.
Make sure that the installation place is compatible with the following
specifications, before unpacking the appliance:
• the electric socket or the all-pole switch which the appliance is
connected to must be easily accessible for the user, so that the user
will easily disconnect the machine from the electric mains when
necessary;
• the socket voltage must correspond to that indicated on the
appliance data plate.
• the gradient of the supporting surface should NOT exceed 2°;
Check that the size and strength of the
surface where the machine is installed are
appropriate to safely bear it.
For a correct and ergonomic use of the
machine, it is recommended to install it
onto a surface which is at least 1 m high.
The appliance must be installed on a
horizontal surface.
The appliance must only be installed in places where it can be used
and serviced by qualified staff only.
If the appliance needs to be positioned close to a wall, it is necessary
to leave a space of at least 8 cm between the appliance’s back and the
wall, in order to make sure that the air outlet grill at the back of the
appliance is unobstructed.
To Next Page
Loading...
Need help?
General
