English
10
46
10 CLEANING AND MAINTENANCE
Before performing any maintenance and/or
cleaning operations, turn off the appliance
by setting the switches to the “OFF”
position. Disconnect the appliance from
the power supply by removing the plug
from the socket and wait for the appliance
to cool down.
The Manufacturer is not liable for damage
or malfunctions caused by a wrong or lack
of maintenance.
Never perform any cleaning operation
when the machine is in “standby” mode.
Do not use direct water jets.
In case of faults, immediately turn off the
appliance, disconnect it from the power
supply by removing the plug from the
socket and contact the nearest Service
Centre.
10.1 General Notes for Correct Operation
Non-removable components and the
machine itself must be cleaned, when not
differently specified, only by using cold or
lukewarm water, with a non-abrasive
sponge and a damp cloth.
Never use direct water jets. Wring the
damp cloth or the sponge before using it
to clean the appliance.
All parts requiring cleaning are easily accessible, so no tools are
needed.
Periodic maintenance and cleaning will keep the appliance in good
working conditions for a longer time and ensure compliance with
basic hygienic standards.
Follow the instructions and timing indicated in the "MAINTENANCE
SCHEDULE" to ensure correct operation of the appliance.
If the Cappuccinatore (CAPPUCCINO set-up) is not used for more
than an hour, carry out a cleaning cycle of the spouts before re-using
it (see chapter “Cleaning the Cappuccinatore”).
10.2 Cleaning and Scheduled Maintenance
All parts must be washed with lukewarm
water only and without using detergents or
solvents that could change their shape or
performance.
All removable parts cannot be washed in
the dishwasher.
Do not clean the electric parts with wet
cloths and/or with degreasing detergents.
Remove any dust residues with a jet of dry
compressed air or with an antistatic cloth.
To Next Page
Loading...
Need help?
General
