English
5
14
5.2 Unpacking and Positioning
On receipt of the appliance, make sure that it has not suffered any
damage during transport or that the packaging has not been unduly
opened with consequent stealing of the components contained in it.
If damage of any kind is found, the courier must be informed and
notice must be immediately given to the importer or to the seller.
If these are not in the purchaser’s country, please contact the
manufacturing company directly.
A bag called “ACCESSORY BOX” is supplied with the appliance. It
contains the following items:
• Instruction manual.
• Screws and plates.
SA Accessory box
Lift the pallet in order to remove the fixing screws. Screw the 4
supporting feet.
A Fixing screws
B supporting feet
Check that the surface where the appliance shall be positioned is steady.
Drill a hole with a 100 mm Ø on the surface.
A 100 mm Ø hole
B Ideal position of the adjustable feet
Definitely place the machine on the supporting surface.
Install the appliance on the surface and level it by adjusting the height
of the feet.
To Next Page
Loading...
Need help?
General
