English
10
50
10.2.9 Cleaning of the Cappuccinatore
Never clean the Cappuccinatore when the
machine is in “STANDBY” mode.
The CAPPUCCINATORE must be
cleaned every time it is used, to avoid the
solidification of deposits.
All the removable parts must be washed
and rinsed under running water.
To clean each part of the Cappuccinatore group separately, remove:
• the top protection cover, by pulling it outwards;
• remove the Cappuccinatore, by pulling it outwards;
• the fork;
• the crema adjusting lever;
• the temperature adjusting lever;
• the Cappuccinatore body cap;
• the fitting connecting the suction tube to the body of the
Cappuccinatore;
• the milk dispensing spout;
• the milk suction hose.
23 upper protection cover
24 Crema adjusting lever
25 Temperature adjusting lever
26 milk dispensing spout
29 Cappuccinatore
30 Milk suction hose
31 fitting
32 fork
33 Cappuccinatore body cap
The following images show the correct disassembly sequence of the
Cappuccinatore.
To reassemble, follow the previous instructions in reverse order.
To Next Page