Saeco Xsmall Plus - Page 11

Page 2 / 4 Rev. 00 / Jul. 2008 Saeco Int.
02 TECHNICAL SPECIFICATIONS XSMALL
RINSE Initial rinse Final rinse
When performed When the coffee maker is
activated When the boiler
temperature is ≤ 50°C
When the machine is switched off
electronically, manually or auto-
matically after 60’, if at least one
coffee has been dispensed, before
switching off
No. of pulses 180 80
Stopping option Yes, by pressing any key Yes, by pressing any key
User disable option No No
Production/Service
department disable option
No No
No. of pulses user adjust-
ment option
No No
No. of pulses Produc-
tion/Service department
adjustment option
No No
Pulse range
(Min. - Max.)
No No
WATER HARDNESS CANNOT BE SET
DREGS DRAWER Description and values
Time-out for dreg drawer 5 sec.
Empty dreg drawer alarm after
(double coffee is the last product dispensed)
8 lots of dregs
(9 lots of dregs)
Warning to empty dreg drawer after No
Reset dregs counter Every time the dreg drawer is removed
for at least 5 seconds, even if the “empty
dregs” alarm has not been activated
POWER/OFF Description and values
Inlet time (min. - max.) 60 minutes
Inlet time (default) No
Inlet time prog. by the user No
Inlet time prog. by Production/Service department No
WATER TANK Description
Level sensor No
Water reserve (pulses) with water fi lter No
Water reserve (pulses) with no water fi lter No
Water reserve modifi able by Production/Service departments No
“Fill tank” alarm No
“No tray” alarm No
Water mains No