Saeco Xsmall Plus - Customer and Programming Menu

XSMALL 03 BRIEF INSTRUCTIONS
Saeco Int. Rev. 00 / Jul. 2008 Page 1 / 3
Indications Causes Solutions
Fixed
Machine at correct temperature
- for coffee dispensing
- for hot water dispensing
- for steam dispensing
Blinks slowly
Machine in pre-heating phase for coffee,
hot water and steam dispensing.
Blinks quickly
Machine overheated; the machine cannot
dispense coffee in this mode.
The water must be drained out
into a recipient by turning the se-
lector clockwise to the “
” point,
until the green correct temperature
LED remains lit in a fi xed manner.
The fl ow of water dispensed should
then be stopped.
Blinks slowly
The machine is being programmed
with the coffee cup fi ll level
Fixed
Machine dispensing coffee
3.1. Customer and programming menu
On/Off
Small coffee (press twice
for double coffee)
Large coffee (press twice
for double coffee)
Alarm LED
Double coffee LED
Selector
- coffee
- hot water
- steam
Temperature LED
21
1817