XSMALL 01 INTRODUCTION
Saeco Int. Rev. 00 / Jul. 2008 Page 1 / 4
1.1 Documentation required
The following documentation is needed for repair procedures:
Instruction booklet for specifi c model.•
Technical documentation for specifi c model (diagrams, exploded drawings).•
1.2 Tools and equipment required
As well as the standard equipment, the following is required:
Qty Description Notes
1 Screwdriver Torx T 10
1 Pliers for Oetiker clamps
1 CC -A - Vdc tester
1 Digital thermometer Scale limit > 150°C
1 SSC (Saeco Service Center) Programmer
1.3 Material
Description Notes
Thermal paste Heat resistance > 200°C
Descaler Saeco Entkalker
Grease solvent Personal preference
Silicone grease Safe to use with food
1.4 Safety warnings
We recommend you consult the technical manual of the machine before performing any mainte-
nance work.
Observe all applicable standards relating to the repair of electrical appliances.
Always disconnect the power plug from the mains before beginning repair work.
Simply turning off the main machine power switch is not an adequate safety precaution.
This domestic appliance is rated as insulation class I.
On completion of the repair work, insulation and dielectric rigidity tests must be performed.
To Next Page
Loading...
