Saeco Int. Rev. 00 / Jul. 2008 Page 9 / 9
XSMALL 07 DISASSEMBLY
1) To remove the upper grinder support,
use a hex key to exert pressure, turning it
clockwise in order to release the grinder
support from the bayonet coupling.
2) To remove the grinder from the upper
support, turn it anti-clockwise until it de-
taches from the bayonet coupling.
3) To remove the lower grinder, keep the
increment pin (A) locked in position and
turn the grinder anti-clockwise, until it
detaches from the bayonet coupling.
4) When refi tting the upper grinder sup-
port, make sure you reposition it so that
the mark is as illustrated in the photo.
7.12. Grinder adjustment/assembly and disassembly
1
2
3
A
4
To Next Page
Loading...
