Saftronics HPVFE - Advanced Program Group Parameters - Fault Handling; A450 [Fault Clear] Function; A451 [Auto Rstrt Tries] Setting; A452 [Auto Rstrt Delay] Setting

Advanced Program Group (continued)
59
A446 [PWM Frequency]
Sets the carrier frequency for the PWM output waveform. The chart below provides derating guidelines based on the PWM frequency setting.
Important: Ignoring derating guidelines can cause reduced drive performance.
Values Default 4.0 kHz
Min/Max: 2.0/10.0 kHz
Display: 0.1 kHz
A448 [SW Current Trip] Related Parameter(s): P103
Enables/disables a software instantaneous (within 100 ms) current trip.
Values Default 0.0 (Disabled)
Min/Max:
0.0/(Drive Rated Amps ⋅ 2)
Display: 0.1 Amps