SAJ H2 Series - 4. INSTRUCTIONS FOR INSTALLATION; 4.1 Unpacking and Inspection

4.
ELECTRICAL
connection
4.1
Safety Instruction
for Hot-line Job
4.2
Specications for
HYBRID SOLAR INVERTER INSTRUCTION MANUAL
Electrical Inteace
DANGER
· Dangerous to life due to potential re or electricity shock.
· When power-on, the equipment should in conformity with national rules and regulations.
· The direct connection between the inveer and high voltage power systems must be operated by qualied technicians
in accordance with local and national power grid standards and regulations.
· The PV arrays will produce lethal high voltage when exposed to sunlight.
WARNING
· Any improper operation during cable connection can cause device damage or personal inju
Electrical connection must only be operated on by professional technicians. Please keep in
mind that the inveer is a bi-power supply equipment. Before connection, necessa protective
equipment must be employed by technicians including insulating gloves, insulating shoes and
safety helmet.
Figure 4.1
Electrical Inteace of H2 inveer
1615