SAJ H2 Series - 3. PRODUCT INFORMATION; 3.1 Application Scope of Products; 3.2 Specification for Product Model

3.
INSTALLATION
notes
The Determination
of the Installation
HYBRID SOLAR INVERTER INSTRUCTION MANUAL
3.1.1 Mounting position
DANGER
· Dangerous to life due to potential re or electricity shock.
· Do not install the inveer near any inammable or explosive items.
NOTICE
· This equipment meets the pollution degree II.
· Inappropriate or the harmonized installation environment may jeopardize the life span of the inveer.
· Installation directly exposed under intensive sunlight is not recommended.
· The installation site must be well ventilated.
The equipment employs natural convection cooling, and it can be installed indoor or outdoor.
(1) Do not expose the inveer to direct solar irradiation as this could cause power derating due
Figure 3.1
Mounting Method
09
10
to overheating.
(2) Mount veically or tilted backwards by max. 15 ° . Never install the inveer tilted forwards,
sideways, horizontally or upside down.
(3) Install the inveer at eye level for convenience when checking the display and possible
maintenance activities.
3.1
Position