SAJ H2 Series Instruction Manual

HYBRID SOLAR INVERTER INSTRUCTION MANUAL
Note: The hybrid inveer is with expo limitation function, which can be realized by connecting
SAJ recommended sma meter to the hybrid energy storage system. Users can contact SAJ for
fuher details for the sma meters. If users have no intention to set the expo limitation func -
tion, please ignore chapter 4.8.4.
If users have purchased the sma meter that recommended by SAJ, before setting the expo
limitation function, users shall connect the meter to the system as below:
4.9
4.8.2 RJ45 Pin Po Denition
System Connection
4.8.4
Sma Meter Connection
4.8.3
Figure 4.14
Inse the communication cable
9-Pin serial po
Figure 4.15
Connection of communication cable
Figure 4.16
Sma meter wiring
Open the waterproof cover, pass the crimped communication cable
through waterproof cover, inse cable to the corresponding communica -
tion po, then tighten waterproof cover with screws.
2625
The system connection in Australia and New Zealand is as below, the neutral cable of AC
and backup side must be connected together for the safety reason.
Note: DO NOT connect the PE terminal of BACKUP side.
/BMS
EMS/METER
PORT1PORT0

SAJ H2 Series Specifications

General

Brand	SAJ
Model	H2 Series
Category	Inverter
Language	English