SAJ H2 Series Instruction Manual

HYBRID SOLAR INVERTER INSTRUCTION MANUAL
4443
1 Master Relay Error
2 Master EEPROM Error
3 Master Temperature High Error
4 Master Temperature Low Error
5 Lost Communication M<->S
6 GFCI Device Error
7 DCI Device Error
8 Current Sensor Error
9 Master Phase1 Voltage High
10 Master Phase1 Voltage Low
11 Master Phase2 Voltage High
12 Master Phase2 Voltage Low
13 Master Phase3 Voltage High
14 Master Phase3 Voltage Low
15 Grid Voltage 10Min High
18 Master Grid Frequency High
19 Master Grid Frequency Low
21 Phase1 DCV Error
22 Phase2 DCV Error
23 Phase3 DCV Error
24 Master No Grid Error
27 GFCI Error
28 Phase1 DCI High
29 Phase2 DCI High
30 Phase3 DCI High
31 ISO Error
32 Bus Voltage Balance Error
33 Master Bus Voltage High
34 Master Bus Voltage Low
35 Master Grid Phase Error
36 Master PV Voltage High Error
37 Master Islanding Error
38 Master HW Bus Voltage High
39 Master HW PV Current High
40 Master Self-Test Failed
41 Master HW Inv Current High
42 Master AC SPD Error
43 Master DC SPD Error
44 Master Grid NE Voltage Error
45 Master Fan1 Error
46 Master Fan2 Error
47 Master Fan3 Error
48 Master Fan4 Error
49 Lost Communication between Master and Meter
50 Lost Communication between M<->S
52 HMI EEPROM Error
53 HMI RTC Error
54 BMS Device Error
55 BMS Lost.Conn󶀅󶀅
56 CT Device Err
57 AFCI Lost Com.Err
61 Slave Phase1 Voltage High
62 Slave Phase1 Voltage Low
63 Slave Phase2 Voltage High
64 Slave Phase2 Voltage Low
65 Slave Phase3 Voltage High
66 Slave Phase3 Voltage Low
67 Slave Frequency High
68 Slave Frequency Low
73 Slave No Grid Error
74 Slave PV Input Mode Error
75 Slave HW PV Curr High
76 Slave PV Voltage High Error
77 Slave HW Bus Volt High
81 Lost Communication D<->C
83 Master Arc Device Error
84 Master PV Mode Error
85 Authority expires
86 DRM0 Error
87 Master Arc Error
88 Master SW PV Current High
94 Output OverLoad
OGrid Output Voltage Low
OGrid Output Sho Circuit
Lost Communication between inveer and SEC
89
Batte SoftConnet TimeOut
Batte OverLoad
Batte Charge Voltage High
Batte Current High
Batte Open Circuit
Batte Discharge Voltage Low
If the following fault code occurs, please contact professional personnel for treatment.

SAJ H2 Series Specifications

General

Type	Hybrid Inverter
Output Voltage	220/230/240V
Output Frequency	50/60Hz
Battery Compatibility	Lithium
Communication	RS485
Max. DC Input Power (kW)	12kW
Max. AC Output Power (kVA)	10kVA
Operating Temperature	-25°C to +60°C
Storage Temperature	-40°C to +70°C
MPPT	Dual MPPT