Sakura Tissue-Tek Xpress x120 User Manual

Revised 10/02/2012 1.5
Figure 1-C
Power Switch
..13
.. — Located on the right side panel of
the cabinet (Figure 1-C), turns the power on and off.
System Start Button
..14
.. —A button located on the right
side panel above the power switch, (Figure 1-C) turns on
the computer system.
Internal Light Button
..15
.. — Turns the light inside the
Tissue-Tek Xpress x120 on or off (Figure 1-D). The light
must be manually turned off. Shutting down the instru-
ment will not turn the light off.
USB Interface
..16
. — USB communication port for
connection to a memory stick for transfer of data to an
external PC (Figure 1-D).
Figure 1-D
External Alarm Output Port — allows for connection of
an external audible alarm to a switched no-voltage contact
within the Tissue-Tek Xpress x120; contact is switched
when an alarm condition occurs.
UPS Signal Input Port — provides for connection of the
Tissue-Tek Xpress x120 to an external Uninterruptible
Power Supply (UPS) or backup generator.

Sakura Tissue-Tek Xpress x120 Specifications

General

Brand	Sakura
Model	Tissue-Tek Xpress x120
Category	Computer Hardware
Language	English